This is a top automatic design. PLC control and PID for accurate
temperature control. Automatic web roll exchanger.
The main machine is on a shaking frame. So the film thickness is
Key Technical parameters:
D75 x 2 1250
Key parts list:
- D75 extruder by Taiwan supplier, 2 sets.
- Distributor by Taiwan supplier, 1 set.
- T-die by Taiwan supplier, 1 set
- Machine frame on a shaking , 1 set.
- Auto loader,2 sets (optional)
- Console, 1 set
- Fully automatic winding station, 1 set
- Air shaft, 2 pcs
- Wastage winder, 1 set
Key parts description:
- Cooling roller: mirror surface + chrome plate. D320 x 1300 mm, with
double water circulation system inside. With water tap for water
- Film hauling roller, 2 pcs. D320 x1300 mm, with double water
circulation system inside. With water tap for water cooling.
- Film outlet method: with active shaking.
- T-die width: 1250 mm (if no shaking, 1200 mm will be enough). T-die
heater is closed and power cable is with safety plug.
- Gearbox: stepless spiral gear. Gear of 38Cr with special treatment.
- Wastage winder, 1 set via a PVC pipe.
- Screw: diameter 75mm, 38CrMoAlA + nitride by a Taiwan
supplier.Screw length to diameter 30:1.
- Temperature control zones: 5 zones. 4 on the barrel, 1 on the neck
- Max production capacity: 45-100kg/h.
10. Film width: 100mm-1000mm
11. Film thickness: 0.014 0.05 mm.
12. Winding method: frictional. Fully automatic, PLC control by
Taiwan DELTA. Saw shaped knife cutting. Automatic push away and
13. Variable frequency drive: 8.5kw-6 grade by Taiwan Ambition.
14. Assistant machine V. F. drive: 1.5 kw, 2 set by Taiwan
15. Winding torque motor: Regulator 30 kg, each 1. Wastage width:
10 20 mm.
16. Installed power capacity: 48 kw.
Inline Wastage Crushing & Reusing Line
It is built up with a small crusher, a blower, a hose and a mini
extruder to reuse the margin wastage instantly. Details are at